Measurement of internal residual stress of the laser rapid forming parts by incremental-step hole drilling method
文献类型：会议论文
| 作者 | Lai YB(来佑彬) ; Liu WJ(刘伟军); Zhao YH(赵宇辉); Wang FY(王福雨); Han WC(韩文超)
|
| 出版日期 | 2013 |
| 会议名称 | 2013 2nd International Conference on Machine Design and Manufacturing Engineering, ICMDME 2013 |
| 会议日期 | May 1-2, 2013 |
| 会议地点 | Jeju Island, Korea, Republic of |
| 关键词 | Calibration Industrial engineering Machine design Stress concentration Stress measurement |
| 页码 | 1011-1016 |
| 中文摘要 | In order to study the residual stress distribution in the titanium alloy laser rapid forming parts, the incremental-step hole drilling method is improved. Choose a calibration sample which has the same material as the test sample to conduct internal residual stress measurement by incremental-step hole drilling method. Conduct stress-release heat treatment (insulation 4 hours in 750 centigrade, furnace cooling) to the calibration sample before the measurement to uniform the internal stress. Calculate calibration compensation coefficient according to the calibration sample stress measurement result, and use the compensation coefficient to compensate the stress measurement result of the laser rapid forming sample. This method improves the reliability of internal residual stress measurement by incremental-step hole drilling method. Then use this method to measure the stress of laser rapid forming sample. The result shows that both the residual stress in the X direction and the Y direction is larger when the depth ranges from 1 mm to 3 mm. When the depth is greater than 3 mm, the residual stress decreases gradually with the hole depth increasing. The maximum value in the X direction is 147.13 MPa, and the maximum value in the Y direction is 236.32 MPa. © (2013) Trans Tech Pudlications, Switzerland. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 1 |
| 会议主办者 | Trans Tech Publications |
| 会议录 | Applied Mechanics and Materials
 |
| 会议录出版者 | Trans Tech Publications Ltd, |
| 会议录出版地 | Zurich-Durnten, Switzerland |
| 语种 | 英语 |
| ISSN号 | 1660-9336 |
| ISBN号 | 978-3-03785-781-6 |
| WOS记录号 | WOS:000334133200204 |
| 源URL | [http://ir.sia.cn/handle/173321/13830]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Lai YB,Liu WJ,Zhao YH,et al. Measurement of internal residual stress of the laser rapid forming parts by incremental-step hole drilling method[C]. 见:2013 2nd International Conference on Machine Design and Manufacturing Engineering, ICMDME 2013. Jeju Island, Korea, Republic of. May 1-2, 2013. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。