Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping
文献类型：期刊论文
| 作者 | Zhang K(张凯); Wang, Shijie; Liu WJ(刘伟军) ; Long RS(龙日升)
|
| 刊名 | Applied Surface Science
 |
| 出版日期 | 2014 |
| 卷号 | 317页码:839-855 |
| ISSN号 | 01694332 |
| 产权排序 | 2 |
| 通讯作者 | 张凯 |
| 中文摘要 | Laser metal deposition shaping (LMDS) is a state-of-the-art technology that combines rapid prototyping and laser processing. There are many factors affecting the quality, precision, microstructure and performance of the LMDS-deposited parts. Among these factors, substrate preheating is a significant one because it can change the heat history of the LMDS process. Preheating is generally adopted to reduce the residual stresses and the risk of thermal distortion and cracking. However, it changes the heat transfer conditions and affects the final microstructure and properties. In this work a numerical simulation model was established to analyze the heat transfer characteristics between deposited material and substrate, the influence rules of substrate preheating on the thermal behavior during LMDS, and the distribution characters of temperature and stress field. And then, the experimental methods were used to evaluate the effects of substrate preheating on the surface quality, microstructure, composition, hardness distribution, and mechanical properties of as-built thin-wall parts. The experimental results primarily agree with the theoretical analysis and numerical model, which indicates that in terms of the varied thermo-mechanical coupled field, the investigated microstructure and properties of formed components depend considerably on the initial temperature of the substrate, so the LMDS process can be effectively adjusted and controlled by means of substrate preheating. |
| WOS标题词 | Science & Technology ; Physical Sciences ; Technology |
| 类目[WOS] | Chemistry, Physical ; Materials Science, Coatings & Films ; Physics, Applied ; Physics, Condensed Matter |
| 研究领域[WOS] | Chemistry ; Materials Science ; Physics |
| 关键词[WOS] | FINITE-ELEMENT-ANALYSIS ; INJECTION MOLD ; POWDER ; MANUFACTURE ; TEMPERATURE ; LAYER ; STEEL |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| WOS记录号 | WOS:000344379900125 |
| 公开日期 | 2014-11-29 |
| 源URL | [http://ir.sia.cn/handle/173321/15273]  |
| 专题 | 沈阳自动化研究所_装备制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Zhang K,Wang, Shijie,Liu WJ,et al. Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping[J]. Applied Surface Science,2014,317:839-855. |
| APA | Zhang K,Wang, Shijie,Liu WJ,&Long RS.(2014).Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping.Applied Surface Science,317,839-855. |
| MLA | Zhang K,et al."Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping".Applied Surface Science 317(2014):839-855. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。