A method to get capture area of a waterjet propulsor inlet duct based on grid filter weighting
文献类型：会议论文
| 作者 | Wang C(王超) ; Hu ZQ(胡志强); Lin Y(林扬); Xu HL(徐红丽)
|
| 出版日期 | 2014 |
| 会议名称 | OCEANS 2014 MTS/IEEE Taipe |
| 会议日期 | April 7-10, 2014 |
| 会议地点 | Taipei, Taiwan |
| 关键词 | Waterjet propulsion Inlet duct Capture area CFD |
| 页码 | 1-4 |
| 中文摘要 | In order to get capture area and calculate performance of a waterjet propulsor inlet duct conveniently and fast, grid filter weighting method is proposed based on Computational Fluid Dynamic (CFD) technology in this paper. Numerical simulating of the inlet duct is carried out. Implementation process of this method is discussed in detail. With processing the data of solving results, parameters in capture area are got under different Inlet Velocity Ratio (IVR) condition with this method. Efficiency and hydraulic loss of the inlet duct are calculated for the waterjet propulsor. The results are compared with that got with semi-elliptical fitting method. The calculation results obtained with both methods show good consistency. When IVR equals to 0.6, the efficiency reaches a maximum value, about 0.943. And the hydraulic loss reaches a minimum value, about 0.76. In the whole IVR range, the relative error of efficiency between these two methods is less than 0.2%. The relative error of hydraulic loss of the inlet duct between these two methods is less than 1.3%. The calculating process and results show that this method is convenient to calculate efficiency and hydraulic loss of the waterjet propulsor inlet duct. It can be easily inserted into automatic optimization process of an inlet duct to improve thrust performance of vehicles equipped with waterjet propulsors. |
| 收录类别 | EI |
| 产权排序 | 1 |
| 会议录 | OCEANS 2014 MTS/IEEE
 |
| 会议录出版者 | IEEE |
| 会议录出版地 | Piscataway, NJ, USA |
| 语种 | 英语 |
| ISBN号 | 978-1-4799-3646-5 |
| 源URL | [http://ir.sia.cn/handle/173321/15358]  |
| 专题 | 沈阳自动化研究所_海洋信息技术装备中心 |
| 推荐引用方式 GB/T 7714 | Wang C,Hu ZQ,Lin Y,et al. A method to get capture area of a waterjet propulsor inlet duct based on grid filter weighting[C]. 见:OCEANS 2014 MTS/IEEE Taipe. Taipei, Taiwan. April 7-10, 2014. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。