Study of nozzle and vent locations on die casting filling process
文献类型：会议论文
| 作者 | Gui G(贵刚); Nie YY(聂义勇) |
| 出版日期 | 2002 |
| 会议名称 | 10th International Manufacturing Conference in China (IMCC2002) |
| 会议日期 | October 11-13, 2002 |
| 会议地点 | Xiamen, China |
| 关键词 | Casting Nozzle location time Optimal design Temperature field |
| 页码 | 6 pp. |
| 中文摘要 | The casting nozzle location plays an important role in die casting. Improper location results in defects, such as cold shut, air cavity, shrinkage, etc. Therefore, it’s sure that the molten metal full fills the mould cavity before it solidifies. And, it’s to be wished that no vortex occur during the filling process, because the vortex is a main source that induces gas entrapment. To get the high quality and performance product, the inlet and outlet locations must be set properly. This paper, an optimal design problem of nozzle and vent locations, which is constrained by nonlinear partial differential equations and boundary and initial conditions, is introduced to describe the location selection on die casting filling process. By numerical simulation, one can compare the filling time, flow pattern and temperature field at different inlet and outlet locations, then choose the most proper locations. |
| 产权排序 | 1 |
| 会议录 | Proceedings of the 10th International Manufacturing Conference in China (IMCC2002)
 |
| 语种 | 英语 |
| 源URL | [http://ir.sia.cn/handle/173321/9794]  |
| 专题 | 沈阳自动化研究所_工业信息学研究室_先进制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Gui G,Nie YY. Study of nozzle and vent locations on die casting filling process[C]. 见:10th International Manufacturing Conference in China (IMCC2002). Xiamen, China. October 11-13, 2002. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。