Research on coordinate measurement, geometric modeling and polishing path generation for the shell of glass cover
文献类型：会议论文
| 作者 | Zhao JB(赵吉宾) ; Liu WJ(刘伟军); Sun YW(孙玉文)
|
| 出版日期 | 2006 |
| 会议名称 | 9th International Symposium on Advances in Abrasive Technology |
| 会议日期 | September 26-29, 2006 |
| 会议地点 | Dalian, China |
| 关键词 | point clouds surface reconstruction nor-uniform rational B-spline polishing path |
| 页码 | 210-215 |
| 中文摘要 | A new method of coordinate measurement, geometric modeling and polishing path for the shell of big glass cover is proposed. A system of automatic measurement based on robot is designed by employing structured light in the paper. By means of the method of local surface fitting, the orderly data points on sectional plane are obtained. Then the disorderly scatter points become orderly array points, an accurate and smooth fitting surface is implemented. At the last, the polishing path is generated for reconstructed surface by using the method of isoparametric curve. The experiment demonstrated that the proposed method highly adapts to freeform surface reconstruction for wrap-around models. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 1 |
| 会议主办者 | Dalian Univ Technol, Int Comm Abras Technol, Japan Soc Abras Technol, Dalian Assoc Sci & Technol, Chinese Mech Engn Soc, Natl Nat Sci Fdn China, Liaoning Provincial Mech Engn Soc |
| 会议录 | Current Development in Abrasive Technology, Proceedings
 |
| 会议录出版者 | FRONTIERS DESIGN MANUFACTURING |
| 会议录出版地 | RIVERWOOD |
| 语种 | 英语 |
| ISBN号 | 978-0-9580692-8-1 |
| WOS记录号 | WOS:000246100800038 |
| 源URL | [http://ir.sia.cn/handle/173321/8260]  |
| 专题 | 沈阳自动化研究所_工业信息学研究室_先进制造技术研究室 |
| 推荐引用方式 GB/T 7714 | Zhao JB,Liu WJ,Sun YW. Research on coordinate measurement, geometric modeling and polishing path generation for the shell of glass cover[C]. 见:9th International Symposium on Advances in Abrasive Technology. Dalian, China. September 26-29, 2006. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。