激光叠焊的NC代码自动编程研究
文献类型:期刊论文
作者 | 徐志刚![]() ![]() |
刊名 | 机械设计与制造
![]() |
出版日期 | 2013 |
期号 | 11页码:228-230 |
关键词 | VC VBA DXF 自动编程 |
ISSN号 | 1001-3997 |
其他题名 | The Study on NC Code Auto-Programming of Laser Stitch Welding |
产权排序 | 1 |
中文摘要 | 基于DXF文件读取,自动生成NC加工代码,实现设计与加工一体化。介绍了激光叠焊系统的总体组成部分。自动编程系统加载AutoCAD二次开发菜单,在AutoCAD里面参数化绘图和NC代码仿真,嵌入到AutoCAD。分析DXF文件格式,利用VC编写程序接口,读取图元信息。对大圆弧和长直线采用分段搭接的焊接方法,解决一次性焊接行程不够的问题。根据焊接工艺路径要求,优化焊接路径。工程实例表明,NC代码编程系统满足实际工程要求,具有良好的人机界面,操作方便。 |
英文摘要 | The system produces NC code automatically based on read DXF file,which accomplishes products from design to machine integrative. The component of lap laser system is introduced. The menu of CAD secondary development loaded, parametric drawing and NC code simulation developed,embedded AutoCAD. Analyzed DXF File date form,an interface programming is developed using VC to obtain in graphic informing form AutoCAD. The cut lap welding method is used to welding large arc and large line,which can solve travel not enough one time welding. According to welding processing requirement,welding path is optimized. Engineering example shows the system of NC programming meet demand. The NC program system has good interface and convenient operation. |
语种 | 中文 |
公开日期 | 2015-02-04 |
源URL | [http://ir.sia.ac.cn/handle/173321/15679] ![]() |
专题 | 沈阳自动化研究所_装备制造技术研究室 |
推荐引用方式 GB/T 7714 | 徐志刚,徐永利. 激光叠焊的NC代码自动编程研究[J]. 机械设计与制造,2013(11):228-230. |
APA | 徐志刚,&徐永利.(2013).激光叠焊的NC代码自动编程研究.机械设计与制造(11),228-230. |
MLA | 徐志刚,et al."激光叠焊的NC代码自动编程研究".机械设计与制造 .11(2013):228-230. |
入库方式: OAI收割
来源:沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。