Fabrication of microstructures using the DMD-based modulating projection printing method
文献类型：会议论文
| 作者 | Yang WG(杨文广); Yu HB(于海波) ; Wang YC(王越超); Liu LQ(刘连庆)
|
| 出版日期 | 2015 |
| 会议名称 | 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2015 |
| 会议日期 | April 7, 2015 - April 11, 2015 |
| 会议地点 | Xi'an, China |
| 关键词 | microfabrication digital mirror device micropillar PEGDA |
| 页码 | 625-629 |
| 中文摘要 | Patterned microstructures of hydrogels have attracted significant attention due to an increasing need for developing scaffolds for tissue engineering, as carriers for drug delivery, and as extracellular matrices for biological studies. However, current tissue engineering approaches lack the flexibility required for developing complex two or three-dimensional (2D/3D) microstructures, which are used to impart suitable cell mechanical microenvironments. In this paper, we present an ultraviolet (UV) light curing method based on a digital mirror device-based modulating projection printing (DMPP) system for fabricating patterned poly(ethylene glycol) diacrylate (PEGDA) hydrogel microstructures. With programmable UV exposure, polymerisation of the PEGDA solution can be induced to create 2D/3D microstructures with high biocompatibility. The main advantage of DMPP is that it is a mask-free method. In addition, the efficiency of the DMPP method is much higher than other methods for patterning PEGDA microstructures. The duration of UV exposure was less than 10 s. In the experiments described below, several types of microstructure arrays have been fabricated. These initial results show that the DMPP method can be used for fabricating highly complex microstructures with controlled accuracy. |
| 收录类别 | EI ; CPCI（ISTP） |
| 产权排序 | 1 |
| 会议主办者 | Institute of Electrical and Electronics Engineers Inc. |
| 会议录 | 2015 IEEE 10th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2015
 |
| 会议录出版者 | IEEE |
| 会议录出版地 | Piscataway, NJ, USA |
| 语种 | 英语 |
| ISBN号 | 978-1-4673-6695-3 |
| WOS记录号 | WOS:000380505700150 |
| 源URL | [http://ir.sia.cn/handle/173321/16896]  |
| 专题 | 沈阳自动化研究所_机器人学研究室 |
| 推荐引用方式 GB/T 7714 | Yang WG,Yu HB,Wang YC,et al. Fabrication of microstructures using the DMD-based modulating projection printing method[C]. 见:10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2015. Xi'an, China. April 7, 2015 - April 11, 2015. |
入库方式： OAI收割
来源：沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。