中国科学院机构知识库网格系统: 检索

Chiplet技术发展现状 期刊论文 OAI收割
科技导报, 2023, 卷号: 41, 期号: 19, 页码: 113
作者: 项少林; 郭茂; 蒲菠; 方刘禄; 刘淑娟

|

收藏 | 浏览/下载：44/0 | 提交时间：2024/05/20

chiplet technology chiplet interconnect interfaces advanced packaging multi physical field electronic assisted design signal and power integrity chiplet技术芯粒互连接口先进封装多物理场电子辅助设计信号与电源完整性

Feasibility Study of ITER In-Vessel Coils Bracket Manufacture and Integration 期刊论文 OAI收割
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2022, 卷号: 32
作者: Xu, Aihua; Cai, Fuhai; Chang, Wangna; Wu, Kaihong; Shi, Yi

|

收藏 | 浏览/下载：78/0 | 提交时间：2022/05/16

Welding Coils Conductors Filling Maintenance engineering ISO Standards Plasmas ITER IVC bracket manufacture and integration structure design welding technology

Controlling the Wetting Properties of Superhydrophobic Titanium Surface Fabricated by UV Nanosecond-Pulsed Laser and Heat Treatment 期刊论文 OAI收割
Nanomaterials, 2018, 卷号: 8, 期号: 10, 页码: 12
作者: Dinh, T. H.; Ngo, C. V.; Chun, D. M.

|

收藏 | 浏览/下载：84/0 | 提交时间：2019/09/17

superhydrophobic nanosecond pulsed laser laser power isotropicity and anisotropicity pattern design wettability temperature Science & Technology - Other Topics Materials Science

Application of interferometry measurement in large-scale optic-electrical theodolite (EI CONFERENCE) 会议论文 OAI收割
2012 International Conference on Sensors, Measurement and Intelligent Materials, ICSMIM 2012, December 26, 2012 - December 27, 2012, Guilin, China
作者: Sun Z.

收藏 | 浏览/下载：47/0 | 提交时间：2013/03/25

Interferometry is a very important method in high accuracy measurement for optical system. This article briefly introduced the conception of interferometry and took a product of 4D Technology as an example to carry on the measurement. A large-scale optic-electrical Theodolite in assemblage was measured and its primary mirror was 400mm in diameter. With the analysis of the results some micro adjustments of the mechanical structure proceed and it made the system perform better. The final results of the whole system is 1.061 in P-V value and 0.1136 in RMS value (=632.8nm) this meets the demand of optical design and practical application. The result demonstrates that interferometry is a good way to be utilized and optimize in the procedure of assemble. (2013) Trans Tech Publications Switzerland.

Design of semi-physical simulation for small satellite by virtual display (EI CONFERENCE) 会议论文 OAI收割
2011 3rd International Conference on Mechanical and Electronics Engineering, ICMEE 2011, September 23, 2011 - September 25, 2011, Hefei, China
Xu K.; Lv Y.; Jin G.

收藏 | 浏览/下载：23/0 | 提交时间：2013/03/25

Semi-physical simulation of attitude control system is the more synthetically test and verify for designing of small satellite control system. It is an important means of small satellite development. However the results of current semi-physical simulation system have a lot of non-intuitive. Compare with the actual environment the simulation environment still has striking disparity. So the shortcomings affect precision of simulation. Based on the virtual display technology the group semi-physical simulation system has been constructed for attitude control of small satellite due to the combination with xPC real-time environment the simulation computer high-precision single-axis air-bearing turntable reaction wheel air thrust device fiber gyroscopes sensors synchronizer power subsystem and wireless devices virtual display computer etc. Semi-physical simulation achieved the visual simulation in orbit and tracked new information of virtual environment of space into real-time simulation computer. Simulation results show that the simulation system for real-time attitude and orbit position of small satellite semi-physical simulation has an excellent display effect. At the same time Real-time transfuse of orbit information provides a more accurate space environment simulation. The simulation system of small satellite attitude control to design and evaluate the more direct and convenient. (2012) Trans Tech Publications Switzerland.

Design of heliostats field for the scale of 1MW solar power tower plant (EI CONFERENCE) 会议论文 OAI收割
2012 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2012, March 27, 2012 - March 29, 2012, Shanghai, China
作者: Zhang H.; Wang Z.; Wang Z.; Zhang H.

收藏 | 浏览/下载：35/0 | 提交时间：2013/03/25

The development in basic technology and market strategy of solar thermal power techniques is booming rapidly due to the limited fossil resources and severe environmental problems all over the world. In this paper the design method of heliostats field for the scale of 1MW solar power tower plant with latitude of 40.4N at the design point of the noon of spring equinox is introduced which uses the multiplication of three efficiencies of cosine atmospheric transmittance and intercept as the preliminary boundary limit to locate heliostats while the spacing between heliostats is set not only for less shading and blocking but also for the availability of installation and maintenance of heliostats. Furthermore its optical performance tested by the software HFLD is quite good which has annual average efficiency of 71.36% and design point efficiency of 80%. 2012 IEEE.

Aircraft flight simulation with landing gear based on multi-domain modeling technology (EI CONFERENCE) 会议论文 OAI收割
2012 2nd International Conference on Computer Application and System Modeling, ICCASM 2012, July 27, 2012 - July 29, 2012, Shenyang, China
作者: Li M.

收藏 | 浏览/下载：19/0 | 提交时间：2013/03/25

This paper create a full aircraft flight simulation model for accurately analyzing the performance and influence of landing gear system. The use of multi-domain modeling technology enables detailed modeling of the flight dynamic and landing gear dynamic. The simulation results show that the aircraft landing gear system mathematical model established appropriately reflects the change of force and moment in the process of taking off and landing and it is actual in the physical process. The parameter design space is easily searched by considering a number of different landing scenarios to optimize the design. the authors.

Technology on fabrication of precise SiC aspherical mirror (EI CONFERENCE) 会议论文 OAI收割
2011 International Conference on Materials and Products Manufacturing Technology, ICMPMT 2011, October 28, 2011 - October 30, 2011, Chengdu, China
Zhang Z.

收藏 | 浏览/下载：30/0 | 提交时间：2013/03/25

This paper represents a technique to produce the large size optical aspherical mirror by using reaction-bonded silicon carbide to meet the material requirements of the space used mirrors based on the characters comparison of all types mirror material. Techniques are described in this paper including the bonding procedure of silicon carbide to form a mirror shape the CCOM technology for aspheric grinding polishing on a home-developed tool -FSGJ-2 and the aspheric profilometry. A specialized Offner Null lens is also developed to measure the aspherical mirror with laser interferometer. With the technology depicted in the paper a 502mm 298 mm off-axis SiC aspherical mirror is successfully made with a surface accuracy better than 1/50rms the final result meets the design requirement. (2011) Trans Tech Publications.

Design of reimaging F/1.0 long-wavelength infrared optical system (EI CONFERENCE) 会议论文 OAI收割
International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, May 24, 2011 - May 24, 2011, Beijing, China
作者: Zhang X.; Zhang X.; Zhang X.

收藏 | 浏览/下载：42/0 | 提交时间：2013/03/25

A reimaging F/1.0 long-wavelength infrared optical system is proposed. The design has a flexible opto-mechanical layout. The design process is as follows. Firstly the catadioptric reimaging system consists of two reflecting mirrors and a relay lenses. Two reflecting mirrors make up of the first imaging system and are therefore free of chromatic aberrations while low dispersion lenses were used in the reimaging system so the optical system do not need achromatic design for a high image quality. Then to correct high-order aberrations resulting from large relative aperture more parameters need to be used with aspheric or diffractive surfaces due to modern optic technology development. Here aspheric is selected for easily manufacture. Finally the design is completed with the help of ZEMAX software. The effective focal length of the objective is 120mm and the field of view (FOV) is 4. The simulated final design shows adequate image quality and the modulation transfer function (MTF) is close to diffraction limit. The effect of the surrounding environmental temperature is analyzed using the concept of thermal defocusing and the thermal compensation is discussed. 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

A fuzzy control method based on information integration for double inverted pendulum (EI CONFERENCE) 会议论文 OAI收割
2011 2nd International Conference on Digital Manufacturing and Automation, ICDMA 2011, August 5, 2011 - August 7, 2011, Zhangjiajie, Hunan, China
作者: Fan Y.

收藏 | 浏览/下载：67/0 | 提交时间：2013/03/25

This article proposes a new fuzzy controller based on information integration. The mathematical model of Linear double inverted pendulum has been studied and estabLished with dynamics analytical method and LQR theory is used to design the optimal Linear inverted pendulum controller then the integration technology is used to design the variable parameters self-tuning fuzzy controller. Thereby the fuzzy controller input variable dimension and the number of fuzzy control rules have been extremely reduced. Two controllers are designed for inverted pendulum system control and the comparison simulation experiments have been done. The results show that the controllers can both reaLize good control and the fuzzy controller has higher precision faster response better stabiLity and robustness. 2011 IEEE.