中国科学院机构知识库网格系统: 检索

浏览/检索结果: 共6条，第1-6条

帮助

条数/页：排序方式：
	A brightness and color correction method of LED display based on CCD camera (EI CONFERENCE) 会议论文 OAI收割 2012 International Applied Mechanics, MechatronicsAutomation and System Simulation Meeting, AMMASS 2012, June 24, 2012 - June 26, 2012, Hangzhou, China 作者: Wang R. 收藏 \| 浏览/下载：23/0 \| 提交时间：2013/03/25 The correction methods of LED displays are aiming to address the uniform issues which includes brightness aspect and color aspect. The correction method use a 33 correction coefficients matrix to reshape the pulse width of each LED. To calculate the correction coefficients a linear system is established which includes a color CCD and a LED display. And a correction algorithm is introduced based on the color CCD. This algorithm describes the relationships of the main color components of a LED when the gray level of a LED is increasing or decreasing the three main color components would change according to the correction coefficients. The results shows that the correction based on this algorithm improved the performance of LED displays. (2012) Trans Tech Publications Switzerland.
	A fuzzy control method based on information integration for double inverted pendulum (EI CONFERENCE) 会议论文 OAI收割 2011 2nd International Conference on Digital Manufacturing and Automation, ICDMA 2011, August 5, 2011 - August 7, 2011, Zhangjiajie, Hunan, China 作者: Fan Y. 收藏 \| 浏览/下载：61/0 \| 提交时间：2013/03/25 This article proposes a new fuzzy controller based on information integration. The mathematical model of Linear double inverted pendulum has been studied and estabLished with dynamics analytical method and LQR theory is used to design the optimal Linear inverted pendulum controller then the integration technology is used to design the variable parameters self-tuning fuzzy controller. Thereby the fuzzy controller input variable dimension and the number of fuzzy control rules have been extremely reduced. Two controllers are designed for inverted pendulum system control and the comparison simulation experiments have been done. The results show that the controllers can both reaLize good control and the fuzzy controller has higher precision faster response better stabiLity and robustness. 2011 IEEE.
	The study of mapping relation of aeroplane complex motion and image movement and compensation technique (EI CONFERENCE) 会议论文 OAI收割 2010 International Conference on Computer Application and System Modeling, ICCASM 2010, October 22, 2010 - October 24, 2010, Shanxi, Taiyuan, China Wei Z.; Wang Y.-Y.; Xue W.-Q.; Dai M. 收藏 \| 浏览/下载：23/0 \| 提交时间：2013/03/25 In order to solve the problem of image blurring due to the image motion which results from the aircraft's motion attitude changes and the relative motion of the camera and aircraft firstly we install linear displacement transducer on the four shock absorbers. By analyzing the displacement values the geometrical relationship between the camera and the aircraft is acquired then relative motion amount between the object and the aircraft is obtained according to the motion and attitude changes. After that making use of geometrical relationship we can calculate the displacement variation of pixels within the camera exposure time. Thereafter taking consider variable motion and non-linear motion as uniform motion in a straight line at the moment of imaging then the model of the blurring image can be established according to the displacement variation of pixels within the camera exposure time and fuzzy point spread function in the two-dimensional movement is built. By using Wiener filtering method with the optimal window the image blurring is eliminated in aerial imaging system. Practice proved that this method can effectively eliminate the image blurring in the aerial imaging system. 2010 IEEE.
	A high-speed acquisition and processing system of the laser speckle signal on the magnetic fluid (EI CONFERENCE) 会议论文 OAI收割 International Symposium on Photoelectronic Detection and Imaging 2009: Laser Sensing and Imaging, June 17, 2009 - June 19, 2009, Beijing, China 作者: Sun Y.; Sun Y.; Wan Q.-H. 收藏 \| 浏览/下载：27/0 \| 提交时间：2013/03/25 In order to achieve the dynamical detection and real-time analysis of the movement status of the magnetic fluid according to the difficulties of the detection of the magnetic fluid established a high-speed acquisition and processing system of laser speckle signal on the magnetic fluid. First of all the FPGA (EP2C8T144C8N) drived the linear array CCD(TCD1501D) to scan in the corresponding time sequence given by the computer collected the laser speckle interferometric image in rapid change on the surface of the magnetic fluid which followed the movement of the magnetic fluid and the signal collected by CCD was converted into the digital data through the high-speed A/D convertor and stored into the internal buffer FIFO of the FPGA whose width and depth were designed by the user as required. Then the FPGA sent the digital signal of the laser speckle interferometric images into the computer through the USB2.0 highspeed differential bus whose transmission rate can reach 480Mb/s in theory. Finally the distribution of the laser speckle on the magnetic fluid was messy and random which carried certain information about the surface of the magnetic fluid based on the theories of the statistic correlation and the subdivision of images analysing and processing the laser speckle interferometric images indirectly got the movement status of the magnetic fluid under the electromagnetic field. The experimental results show that: the High Speed Acquisition and Processing System has the advantage of full-court non-contact non-invasive high-precision and high reliability and so on. The detection resolution of high speed acquisition and processing system is superior to 1m and the sample rate is 3Msps which basically meets the requirements of the magnetic fluid movement state detection. 2009 SPIE.
	Manufacturing and testing of the line-array fiber-optic image slicer based on silicon V-grooves (EI CONFERENCE) 会议论文 OAI收割 MEMS/MOEMS Technologies and Applications III, November 12, 2007 - November 14, 2007, Beijing, China 作者: Zhu Y. 收藏 \| 浏览/下载：23/0 \| 提交时间：2013/03/25 Linear fiber-optic image slicer is used more and more in spatial exploration and imaging system. In this paper a plane arranging method of fiber-optic array based on Si-V grooves is established in order to improve the accuracy and reduce the cost of manufacturing. Firstly the Si-V groove array is micro-machined with anisotropic etching process then optical fibers are placed in the grooves orderly with plane arranging method. Secondly the end surfaces of the device are polished also the linear fiber-optic image slicer is packaged. Finally some parameters are tested including structure parameters transmittivity and vibration test. Experimental results indicate that the maximum error accumulated in 2000 periods of the Si-V grooves is 0.5 m the error of the height in Si-V grooves is less than 0.15m the roughness of the end surface is less than 0.9nm. The transmittivity of the linear fiber-optic image slicer that without optical film is 51.46% at the wavelength of 632.8nm. After random vibration experiment the ratio of the broken fiber increased by 0.1%. While the temperature reached 320C the stress of epoxy will be 130Mpa which is close to the limit resistance stress of 139Mpa some cracks appeared.
	The geometric distortions correction of uncooled large-sized relative aperture infrared imaging system (EI CONFERENCE) 会议论文 OAI收割 Infrared Components and their Applications, November 8, 2004 - November 11, 2004, Beijing, China 作者: Sun Q. 收藏 \| 浏览/下载：20/0 \| 提交时间：2013/03/25 The geometric distortion of infrared image which was created by the large-sized relative aperture optical system. It could be corrected by the digital image processing technology. The magnitude of distortion would be enlarged quickly with the enlargement of relative aperture. Though the distortion could not impact on the articulation of the image it would affect geometric location precision of the image directly. In this paper the distortion correction of uncooled large-sized relative aperture infrared imaging system was discussed and the mathematical model of distortion correction was established. A algorithm of digital image processing was presented and applied based on control points by combining polynomial warping and space variant linear image interpolation. The method of polynomial warping was used to establish the locality relationship between the original image and the distortion ones. The space-variant linear image interpolation provided an efficient way to rebuild the frame of images. The computational costs of the proposed approach are very little and the precision is almost as high as the method of bicubic interpolation when compared to those of state-of-the-art nonlinear interpolation operators.