基于环形镜面的相机外部参数自动标定方法
文献类型:期刊论文
作者 | 付生鹏![]() ![]() ![]() ![]() |
刊名 | 机器人
![]() |
出版日期 | 2015 |
卷号 | 37期号:3页码:277-285 |
关键词 | 相机标定 外部参数 环形镜面 参数优化 |
ISSN号 | 1002-0446 |
其他题名 | Annular mirror based extrinsic camera automatic calibration |
产权排序 | 1 |
中文摘要 | 针对相机外部参数标定中参照物不在相机视野范围内的情况,提出了一种基于环形镜面的相机外部参数自动标定方法.使用半径已知的环形镜面作为反射中介,相机通过镜面反射获得参照物的图像;椭圆检测获得镜面内外圆在相平面中的方程,使用外圆方程计算出镜面在相机坐标系中的位置,然后使用内圆进行位置参数优化;在已知相机内部参数的情况下,通过解决Pn P(perspective-n-point)问题获得相机的虚像和参照物之间的旋转平移矩阵;根据平面镜成像原理,最终计算出相机与参照物之间的实际外部参数;最后通过仿真和实际实验,证明该方法简单易用,可自动完成相机外部参数的标定,并且具有较高的标定精度. |
英文摘要 | Aiming at the extrinsic camera calibration with respect to a reference object without a direct view, an annular mirror based automatic calibration method is proposed. The camera captures the images of the reference object through the reflection of a known-radius annular mirror. The equations of the inner and outer circles of the mirror in the image plane can be obtained with ellipse detection method. The equation of the outer circle is used to get the position of the mirror surface in the coordinate frame of the camera, while the inner circle is used to optimize the position parameter. The rotation and translation matrices between the virtual image of the camera and the reference object can be obtained after solving the PnP (perspective-n-point) problem as the intrinsic parameter of the camera is already known. Finally, the real extrinsic parameters between the camera and the reference object are obtained according to the mirror imaging principle. Simulation and real experiment results show that the method is simple and automatic with high accuracy. |
收录类别 | EI ; CSCD |
语种 | 中文 |
CSCD记录号 | CSCD:5467948 |
源URL | [http://ir.sia.cn/handle/173321/16830] ![]() |
专题 | 沈阳自动化研究所_装备制造技术研究室 |
推荐引用方式 GB/T 7714 | 付生鹏,赵吉宾,夏仁波,等. 基于环形镜面的相机外部参数自动标定方法[J]. 机器人,2015,37(3):277-285. |
APA | 付生鹏,赵吉宾,夏仁波,&刘伟军.(2015).基于环形镜面的相机外部参数自动标定方法.机器人,37(3),277-285. |
MLA | 付生鹏,et al."基于环形镜面的相机外部参数自动标定方法".机器人 37.3(2015):277-285. |
入库方式: OAI收割
来源:沈阳自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。