中国科学院机构知识库网格系统: 检索

Electrically pumped organic laser device with a coupled microcavity structure (EI CONFERENCE) 会议论文 OAI收割
Organic Light Emitting Materials and Devices XVI, August 12, 2012 - August 15, 2012, San Diego, CA, United states
作者: Li Y.; Li Y.; Li Y.; Li Y.; Lin J.

收藏 | 浏览/下载：22/0 | 提交时间：2013/03/25

Lasing action in electrically pumped organic laser device is demonstrated. A DCM laser dye doped Alq film serves as the active layer. High reflective and low loss electrical contacts are used to form a high quality factor coupled microcavity. Single longitudinal cavity mode is obtained at 618 nm with a threshold current density of 612 mAcm-2 under room temperature continuous wave operation. 2012 SPIE.

Use skill of external memory expansion for DSP of TMS320VC5409 (EI CONFERENCE) 会议论文 OAI收割
2012 International Meeting on Opto-Electronics Engineering and Materials Research, OEMR 2012, July 27, 2012 - July 29, 2012, Shenyang, Liaoning, China
作者: Huang L.

收藏 | 浏览/下载：24/0 | 提交时间：2013/03/25

This paper proposes the external data memory and program memory using skills for DSP of TMX320VC5409. Firstly the memory allocation of TMX320VC5409 is described and the its assembly line operation is analyzed. Secondly the external program memory space memory structure and external data memory and program memory extension using skills are discussed. Finally the IS61LV12816 is taken as an example to design the external memory expansion of the hardware and software. The practice has proved that the mode has great flexibility and practicality. (2012) trans tech publications switzerland.

808nm high-power semiconductor laser therapeutic apparatus based on LPC2138 (EI CONFERENCE) 会议论文 OAI收割
2011 IEEE International conference on Intelligent Computation and Bio-Medical Instrumentation, ICBMI 2011, December 14, 2011 - December 17, 2011, Wuhan, Hubei, China
作者: Wang B.; Wang B.

收藏 | 浏览/下载：29/0 | 提交时间：2013/03/25

In this paper we designed an intelligent 808nm high-power semiconductor laser therapeutic apparatus with the LPC2138 ARM processor. The laser is driven by the digital constant current source module and the apparatus has good human-machine interaction performance on account of set the parameters intelligently. The function such as operation mode output power output pulse width and pulse cycle could be easily set through the TFT touch screen. The application software could transmission the log data to the computer by the USB interface in order to check and study the records later. 2011 IEEE.

Electromagnetic radiation test of power driver module in optical tracking system and electromagnetic compatibility (EI CONFERENCE) 会议论文 OAI收割
2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, CMCE 2010, August 24, 2010 - August 26, 2010, Changchun, China
作者: Yu H.

收藏 | 浏览/下载：33/0 | 提交时间：2013/03/25

In order to solve the conductive ring module's interference problems measured the electromagnetic radiation of Power drive module and used test results analysis the electromagnetic compatibility of the conductive ring identified and implemented appropriate EMC (electromagnetic compatibility) measures. When optical tracking system working test equipment can not be fixed. Therefore from the electromagnetic radiation theory the paper analyzed the electromagnetic radiation of the power drive module. From it determine the EMC pre-compliance test method for electromagnetic radiation of power drive module. Based on Test results calculate the interference voltage of wire in Conductive ring and then determine the corresponding EMC method. The results show that when The power drive module Radiate Electromagnetic waves wires would coupled common mode interference voltage its frequency is 3MHz amplitude is about 10V it would interfered the operation of sensor. By reducing the area of ground loops used shielded cables final rule out the interference. 2010 IEEE.

Bootstrap loader design of aerospace payload controller based on TSC695F (EI CONFERENCE) 会议论文 OAI收割
2010 2nd International Conference on Computational Intelligence and Natural Computing, CINC 2010, September 13, 2010 - September 14, 2010, Wuhan, China
Xu W.; Piao Y.

收藏 | 浏览/下载：37/0 | 提交时间：2013/03/25

Anti-radiation TSC695F is usually used as aerospace payload controller in tasks to ensure the aerospace payload having extremely high reliability in abominable space environment. The processor bases on SP ARC V7 architecture with parity check and EDAC so it could design out high reliable bootstrap loader to guarantee the operation system of VxWorks and application codes loaded correctly and worked stable and high effective. First this paper put forward the system hardware composition and boot mode which apply for aerospace payload then it makes clear the related contents of register group initialization stack initialization system hardware initialization in bootstrap loader of TSC695F and give out the method to establish TRAP table. That's all through comparing different type of organize mode of program image. After that compiling of target codes have been described and the kernel code of MakeFile had been given at the same time for reference aimed at the realization of engineering. Although this paper is based on TSC695F but it could be extended to other embedded system based on SP ARC for bootstrap loader analysis and design for example the TSC697 which based on SP ARC V8 with higher performance so this paper has extremely high engineering value. 2010 IEEE.

constructing rate-1 macs from related-key unpredictable block ciphers: pgv model revisited 会议论文 OAI收割
17th International Workshop on Fast Software Encryption, Seoul, SOUTH KOREA, FEB 07-10,
Zhang Liting; Wu Wenling; Wang Peng; Zhang Lei; Wu Shuang; Liang Bo

|

收藏 | 浏览/下载：16/0 | 提交时间：2011/03/31

Message Authentication Code Block Cipher Mode of Operation Provable Security

808nm high-power high-efficiency GaAsP/GaInP laser bars (EI CONFERENCE) 会议论文 OAI收割
Optoelectronic Materials and Devices III, October 27, 2008 - October 30, 2008, Hangzhou, China
作者: Wang Y.; Wang L.; Wang L.; Wang L.; Liu Y.

收藏 | 浏览/下载：23/0 | 提交时间：2013/03/25

808nm high power diode lasers which is rapidly maturing technology technically and commercially since the introduction in 1999 of complete kilowatt-scale diode laser systems have important applications in the fields of industry and pumping solid-state lasers (DPSSL). High power and high power conversion efficiency are extremely important in diode lasers and they could lead to new applications where space weight and electrical power are critical. High efficiency devices generate less waste heat which means less strain on the cooling system and more tolerance to thermal conductivity variation a lower junction temperature and longer lifetimes. Diode lasers with Al-free materials have superior power conversion efficiency compared with conventional AlGaAs/GaAs devices because of their lower differential series resistance and higher thermal conductivity. 808nm GaAsP/GalnP broad-waveguide emitting diode laser bars with 1mm cavity length have been fabricated. The peak power can reach to 100.9W at 106.5A at quasicontinuous wave operation (200s 1000Hz). The maximum power conversion efficiency is 57.38%. Based on these high power laser bars we fabricate a 1 3 arrays the maximum power is 64.3 W in continuous wave mode when the current is 25.0A. And the threshold current is 5.9A the slope efficiency is 3.37 W/A. 2008 SPIE.

High power VCSEL device with periodic gain active region (EI CONFERENCE) 会议论文 OAI收割
Optoelectronic Materials and Devices II, November 2, 2007 - November 5, 2007, Wuhan, China
作者: Zhang Y.; Liu Y.; Liu Y.; Liu Y.; Qin L.

收藏 | 浏览/下载：31/0 | 提交时间：2013/03/25

High power vertical cavity surface emitting lasers with large aperture have been fabricated through improving passivation lateral oxidation and heat dissipation techniques. Different from conventional three quantum well structure a periodic gain active region with nine quantum wells was incorporated into the VCSEL structure with which high efficiency and high power operation were expected. The nine quantum wells were divided into three groups with each of them located at the antinodes of the cavity to enhance the coupling between the optical field and the gain region. Large aperture and bottom-emitting configuration was used to improve the beam quality and the heat dissipation. A maximum output power of 1.4W was demonstrated at CW operation for a 400m-diameter device. The lasing wavelength shifted to 995.5nm with a FWHM of 2nm at a current of 4.8A due to the internal heating and the absence of active water cooling. A ring-shape farfield pattern was induced by the non-homogeneous lateral current distribution in large diameter device. The light intensity at the center of the ring increased with increasing current. A symmetric round light spot at the center and single transverse mode operation with a divergence angle of 16 were observed with current beyond 4.8A.

改进的CBC模式及其安全性分析 期刊论文 OAI收割
通信学报, 2007, 卷号: 28, 期号: 3, 页码: 52-56
温凤桐; 吴文玲; 温巧燕

|

收藏 | 浏览/下载：22/0 | 提交时间：2010/08/20

密码学分组密码工作模式可证明安全性 Gray码 cryptography block cipher mode of operation provable security Gray code

Design and DSP implementation of star image acquisition and Star point fast acquiring tracking (EI CONFERENCE) 会议论文 OAI收割
2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, November 2, 2005 - November 5, 2005, Zian, China
作者: Wang X.; Wang X.; Wang X.

收藏 | 浏览/下载：22/0 | 提交时间：2013/03/25

Star sensor is a special high accuracy photoelectric sensor. Attitude acquisition time is an important function index of star sensor. In this paper the design target is to acquire 10 samples per second dynamic performance. On the basis of analyzing CCD signals timing and star image processing a new design and a special parallel architecture for improving star image processing are presented in this paper. In the design the operation moving the data in expanded windows including the star to the on-chip memory of DSP is arranged in the invalid period of CCD frame signal. During the CCD saving the star image to memory DSP processes the data in the on-chip memory. This parallelism greatly improves the efficiency of processing. The scheme proposed here results in enormous savings of memory normally required. In the scheme DSP HOLD mode and CPLD technology are used to make a shared memory between CCD and DSP. The efficiency of processing is discussed in numerical tests. Only in 3.5ms is acquired the five lightest stars in the star acquisition stage. In 43us the data in five expanded windows including stars are moved into the internal memory of DSP and in 1.6ms five star coordinates are achieved in the star tracking stage.