中国科学院机构知识库网格系统: 检索

Design of controlling system in multi-function durability testing device for vehicle vacuum booster with brake master cylinder (EI CONFERENCE) 会议论文 OAI收割
2012 International Conference on Mechanical and Electronic Engineering, ICMEE 2012, June 23, 2012 - June 24, 2012, Hefei, China
Hao X.; Zhang R.; Li X.; Wang M.

收藏 | 浏览/下载：37/0 | 提交时间：2013/03/25

The quality of vehicle vacuum booster with brake master cylinder is related to the safe of drivers and automobiles. The testing experiment must be executed strictly before leaving factory based on the national standards.The paper introduces the controlling system of multi-function durability testing device which is designed for doing durable testing experiments and Anti-lock braking system (ABS) performance experiments. The structure and theory of device is presented. The controlling system is illuminated in detail. To test the dynamic property this system was identified by a recursive BP neural network. According to the character of a great deal of sensors and actuators the high precision capabilities and reliability the distributed control mode (DCS) including the computer and PLC by RS-485 bus is utilized. The four channels testing experiments are achieved at the same time. The test data is directly memorized into the computer. The results of general endurance and ABS endurance testing experiments are shown to demonstrate the excellent performance of the testing device. 2012 Springer-Verlag Berlin Heidelberg.

Efficient rate control technique for CCSDS image encoding (EI CONFERENCE) 会议论文 OAI收割
IEEE 2nd International Conference on Computing, Control and Industrial Engineering, CCIE 2011, August 20, 2011 - August 21, 2011, Wuhan, China
Jin L.

收藏 | 浏览/下载：94/0 | 提交时间：2013/03/25

For the limitation of data transmission bandwidth and real time transmission demand generally image compression is required to implement the precise and flexible rate control algorithm. Rate control is an important issue in the image compression field. This paper considers the problem of rate allocation to each encoded segment for CCSDS image compression. One straightforward method is to allocate an equal amount of rate to each segment based on the average of the total number of compressed bytes. The obvious drawback of this method is that different segment will be reconstructed to different quality so the overall quality of the reconstructed image will not be optimized. For the shortage of the original rate control method as to improve the overall quality of the reconstructed image an improved rate control algorithm is proposed for CCSDS image encoding. The key component of the proposed rate control method is the appropriate rate allocation. Experiments on the test images show that the PSNR can be increased at about 0.3dB on average compared to the original algorithm. Therefore experimental results confirm the effectiveness of the proposed algorithm in terms of objective evaluation and the rate-distortion performance of the reconstructed image is improved. 2011 IEEE.

Image forward motion compensation method for some aerial reconnaissance camera based on neural network predictive control (EI CONFERENCE) 会议论文 OAI收割
International Conference on Advanced Research on Computer Science and Information Engineering, CSIE 2011, May 21, 2011 - May 22, 2011, Zhengzhou, China
Zhong C.; Ding Y.; Fu J.

收藏 | 浏览/下载：30/0 | 提交时间：2013/03/25

In this paper neural network predictive control method is used to compensate the image forward motion of a certain aerial reconnaissance camera and we have solved several problems that traditional control methods have. Firstly according to the principle of imaging we analyzed the reasons for the existence of image forward motion and established the mathematical model. Secondly we analyzed the theoretically feasibility of the method. At last simulation experiments and test are used to validate the practical feasibility. Through what we have done we conclude that neural network predictive control method can be used to compensate image forward motion for this certain camera and can make a perfect performance. 2011 Springer-Verlag.

Design of VxWorks-based software architecture for space optical remote sensor (EI CONFERENCE) 会议论文 OAI收割
2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, August 12, 2011 - August 14, 2011, Harbin, China
Tao Y.; Song K.

收藏 | 浏览/下载：38/0 | 提交时间：2013/03/25

In order to satisfy requirements of real time and parallel control for the space optical remote sensor and implement the high integration of software a kind of VxWorks-based multitask software architecture was put forward. Firstly the technological requirements of optical remote sensor were analyzed in detail and functions and performances of the optical remote sensor were fixed. Task that was based on each function of optical remote sensor was compartmentalized. Then software architecture of optical remote sensor was designed. Finally experiments were carried out and results verified the accuracy and feasibility of the software architecture. Test results showed that the software architecture satisfied the requirements of real time and parallel control for the space optical remote sensor its functions and performances met the system design target perfectly and the software architecture was applicable to the engineering application of space instrument. 2011 IEEE.

Image motion compensation for a certain aviation camera based on Lucy-Richardson algorithm (EI CONFERENCE) 会议论文 OAI收割
2011 International Conference on Electronics and Optoelectronics, ICEOE 2011, July 29, 2011 - July 31, 2011, Dalian, China
Zhong C.; Fu J.; Ding Y.

收藏 | 浏览/下载：24/0 | 提交时间：2013/03/25

According to the actual situation when high quality and high precision are required for the image both beforehand and afterwards compensation should be used. In this paper we use Lucy-Richardson algorithm to compensate image motion of a certain aviation camera as an afterwards compensation. Firstly we analyze the imaging principle of the camera and the reasons that cause image motion. Then we have a brief introduce of the Lucy-Richardson algorithm. At last in order to show the feasibility of the method we do some simulation. Through theoretical and practical analysis experiments and test we conclude the Lucy-Richardson algorithm can be used to compensate image motion for the certain camera. 2011 IEEE.

Small aircraft CAN bus signal acquisition equipment (EI CONFERENCE) 会议论文 OAI收割
2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, CMCE 2010, August 24, 2010 - August 26, 2010, Changchun, China
Chen C.-Q.

收藏 | 浏览/下载：29/0 | 提交时间：2013/03/25

Small aircraft often used RS485 bus. But with the complexity of the small aircraft's subsystems increase and the progress of field bus technology CAN bus systems in small aircraft use more and more widely. How to record real-time flight experiment data on the small aircraft's CAN bus and provide test data for reproducing the process of a small aircraft flying is very important. This paper presents a design method of signal acquisition device it can be used for small aircraft flying field experiment. 2010 IEEE. as the main chip with DSP2812 SJA1000 as CAN controller CTM1050 as the CAN transceiver CF card as storage media. Gives the diagram of its hardware and software design process. Combined with the background of a small aircraft testing the instrument for data acquisition when the ground experiments and flight progress. Experimental data show that the design of high reliability and CAN signals can effectively complete the record

Study of three-mode parametric instability (EI CONFERENCE) 会议论文 OAI收割
8th Edoardo Amaldi Conference on Gravitational Waves, June 21, 2009 - June 26, 2009, New York, NY, United states
Liang F.; Zhao C.; Gras S.; Ju L.; Blair G.

收藏 | 浏览/下载：21/0 | 提交时间：2013/03/25

The effect of parametric instability in advanced interferometric gravitational wave detectors is a potential problem for their proper operation. Great efforts have been made to study the onset of parametric instabilities and to find ways to control them. Here we present an experimental design for studying parametric instability in a 72 m cavity with suspended high quality fused silica mirrors. With 5 W input power and 20 kW circulation power inside the cavity it is predicted that parametric instability will occur. The resonant condition of parametric instability can be met by thermally tuning the radius of curvature of a test mass. We will present simulation results of parametric gains for different radii of curvature of a test mass. The simulation results will provide the basis for designing the thermal tuning and observation parametric instability experiments. This will provide a test bed for studying parametric instability and its control for next generation detectors. 2010 IOP Publishing Ltd.

Combination of skip-flat test with Ritchey-Common test for the large rectangular flat (EI CONFERENCE) 会议论文 OAI收割
5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, April 26, 2010 - April 29, 2010, Dalian, China
作者: Zhang L.; Xuan B.; Zhang L.

收藏 | 浏览/下载：22/0 | 提交时间：2013/03/25

The Skip-Flat test and Ritchey-Common test are the well-known methods for large flat mirrors measurement. This paper describes the theories of two methods. The combination of the Skip-Flat test with Ritchey-Common test is proposed. Simulations and experiments of the combination method for testing the large rectangular flat of high aspect ratio are shown. The results of the combination test and direct measurement are presented. In comparison of the methods the combination test is in good agreement with the direct measurement. 2010 Copyright SPIE - The International Society for Optical Engineering.

The research on the automatic measurement of frequency characteristics of opto-electronic platform (EI CONFERENCE) 会议论文 OAI收割
2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering, CMCE 2010, August 24, 2010 - August 26, 2010, Changchun, China
作者: Liu H.; Liu H.; Chen J.; Liu H.

收藏 | 浏览/下载：28/0 | 提交时间：2013/03/25

A new frequency characteristic test method is proposed based on the digitization characteristics of optoelectronic platform servo system. First a digital processing controller is used to automatically test the entire process and tested data are uploaded to a PC through CAN-bus and then the tested data are transferred into accurate transfer function with the Levy method. Here we discuss the testing steps the data processing the extraction the Bode diagram plotting and the model identification in detail. The corresponding experiments are carried out and the results show that the method is simple with the features of high efficiency high precision and engineering feasibility. 2010 IEEE.

A new early stopping algorithm for improving neural network generalization (EI CONFERENCE) 会议论文 OAI收割
2009 2nd International Conference on Intelligent Computing Technology and Automation, ICICTA 2009, October 10, 2009 - October 11, 2009, Changsha, Hunan, China
作者: Liu J.-G.; Wu X.-X.

收藏 | 浏览/下载：23/0 | 提交时间：2013/03/25

As generalization ability of neural network was restricted by overfitting problem in the network's training. Early stopping algorithm based on fuzzy clustering was put forward to solve this problem in this paper. Subtractive clustering and Fuzzy C-Means clustering (FCM) were combined to realize optimal division of training set validation set and test set. How to realize this algorithm in backpropagation (BP) network by utilizing neural network toolbox and fuzzy logic toolbox in MATLAB was dwelled on. Early stopping algorithm based on fuzzy clustering and other early stopping algorithms were applied in function approximation and pattern recognition problems in validation experiments. Experiments results indicate that early stopping algorithm based on fuzzy clustering has higher precision in comparison to other early stopping algorithms. Outputs of training set validation set and test set are more accordant. 2009 IEEE.